SZKŁO HARTOWANE SPIGEN GLAS.TR PLATINUM GALAXY S23 ULTRA CLEAR

Tempered glass Glas.TR Platinum from Spigen is a product of the highest class and the highest degree of advancement, prepared in cooperation with Whitestone.

The experience of both manufacturers in glass processing, counting over two decades, has resulted in innovative effects in the protection of today's curved screens.
A patented method was used for the installation, consisting in the application of glue and then its hardening with ultraviolet light.
The degree of hardness of the Glas.TR Platinum glass surface is rated at 9H, which translates into resistance to scratches even with sharp objects, and its additional oleophobic coating reduces the occurrence of fingerprints.

Glass TR. Platinum is primarily compatible with every Spigen case and most cases available on the market.

Check how to install: https://player.vimeo.com/video/453854703

* We do not recommend using 3D glass without any housing.
** The assembly has been simplified to the maximum, but you must remember to read the instructions and watch the instructional video before installation and follow all the steps set by the manufacturer, only in this way you will get 100% satisfaction.
*** After disassembly, the glass leaves no trace on the screen.
**** The higher price than our other glasses is the result of a huge technological advantage over them. This is not due to the higher resistance of the glass, so the glass under the influence of falling or pressure has the right to crack / crumble like any other glass while protecting the screen.

INSTALLATION INSTRUCTIONS:
1) Start the installation in the bathroom right after taking a bath - the steam will absorb all the dust from the atmosphere and it will not interfere with the installation.
2) Thoroughly clean and degrease the surface of the screen, and then use a dry cloth to polish it to a shine.
3) Tape the speaker around.
4) Pour the liquid into the center of the device.
5) Install the glass as evenly as possible, you can also correct this step before curing the surface when the liquid is on the screen with the glass.
6) Using a UV lamp, cure the glass in five places for 15 seconds.
7) Clean the phone thoroughly.
8) Remove and re-add fingerprints.
9) Enjoy a job well done.

PRODUCT FEATURES:
- 100% Original
- Packed in the original packaging
- 0.3mm thick tempered glass
- Resistance up to 9H
- Does not affect touch sensitivity
- Equipped with a nano coating that is resistant to grease and fingerprints
- Dimensions: 158x74mm

SET CONTAINS:
1 x Spigen Glass Tr. Platinum
1 x UV lamp
1 x Installation tools