Add products by adding codes
Add a CSV file
Enter the product codes that you want to add to the basket in bulk (after a comma, with a space or from a new line).
Repeating the code many times will add this item as many times as it appears.
SZKŁO HARTOWANE HOFI UV GLASS PRO+ REALME 11 PRO 5G / 11 PRO+ PLUS 5G CLEAR
Brand
Symbol
9490713932926
Producer code
9490713932926
Series
Producer
HOFI
Tech-protect
Brand
Realme
Hofi UV Glass Pro+ tempered glass protects a significant part of the rounded screen, has a hardness of 9h, which is why it is extremely resistant to scratches even when contacting sharp objects and in addition, it is covered with an oleophobic coating, which reduces the number of fingerprints.
The UV model is glued with the help of a liquid substance over the entire surface of the screen, and then with a UV lamp the substance is hardened.
Thanks to this combination, we get the perfect effect of smoothness, clarity and responsiveness.
The installation is Easy and pleasant for the user
Check how to mount: https://www.youtube.com/watch?v=W7UXRE7YWK& ;feature=youtu.be
* We do not recommend using 3D glass without any housing.
** We do not recommend using glass if the housing overlaps too much on the edges of the screen, there is a risk of undermining.
*** Functionality of the fingerprint reader in the screen can be slightly disturbed in the case of installed coating in the form of foil or glass. The fingerprint reader is not fully refined for additional coatings.
Instructions for assembly:
1) Start assembly in the bathroom just after bathing - water vapor will consume all dust from the atmosphere and it will not be you interfered with the installation.
2) Clean thoroughly and degrease the screen surface, and then with the help of a dry cloth, polish it to a flash.
3) with a ribbon from the set, seal the speaker.
4) connect the UV lamp at Type-C cable help for the power source.
5) Pour the liquid to the very center of the device.
6) Install the glass as much as possible, you can also correct this stage before hardening the surface when the liquid is on the screen together with glass.
7) If a bladder with air appeared, use an ATM card and gently push it out of glass, we do this before hardening.
8) With the help of a UV lamp, harde the glass along the center in five places After 15 seconds and then in about 10 seconds.
9) Clear the phone with residues of hardened glue.
10) If your device has a fingerprint reader in the screen, remember to remove the glass after installing the glass on the screen, remove and again add fingerprints.
11) Enjoy a well-done job!
Product features:
- 100% original
- packed in the original packaging
- 0.3mm thick tempered glass
- scratch resistance 9H
- equipped with an oleophobic coating
- after dismantling it leaves no trace
- Dimensions: 157x71mm
< Br /> The set includes:
1 x glass Hofi UV Glass Pro+
1 x UV lamp (without Type-C cable)
1 x tube with glue
1 x installation set < br />